What is a Hi Boy sprayer?

The Graco 390 PC (Hi-Boy) is a solid airless paint sprayer, built for residential jobs the serious handyman or the skilled property manager or the painter who is just starting out. The Hi-Boy cart design allows for easy one-person bucket changes, while retractable handle doubles as hose storage.

How much PSI does a Graco 390 have?

Graco 390 PC 3300 PSI @ 0.47 GPM Electric Airless Sprayer – Stand |$1,149.00.

How much does a Graco 390 weigh?

Do you need to thin paint for Graco airless sprayer? The airless spray gun systems work well with latex paints, some not even requiring any thinning paint for spraying. You can use the paint directly from the paint can.

Is Graco a good brand paint sprayer? Our top choice is the Graco Magnum X5 Airless Paint Sprayer, which can spray directly from the paint can, is easy to use, and has adjustable pressure. Here are the best airless paint sprayers on the market.

What is a Hi Boy sprayer? – Related Questions

What do you do with an airless sprayer between coats?

What pressure should I set my airless sprayer?

1500 – 3000 psi) and is partially atomized through a small tip. Full atomization is achieved by adding a small amount of air (5 – 35 psi) to the edges of the spray fan – resulting in a softer pattern, more control, higher transfer efficiency, and less overspray.

Why am I getting lines with my paint sprayer?

The main causes of streaks and disturbances in the spray pattern when using Airless devices are: Pressure set too low. Nozzle worn. Material supply disrupted (eg clogged filters)

Is Graco or Wagner better?

How long do airless paint sprayers last?

Short 3 days – 3 months This is probably the most common storage method for most airless paint sprayers.

What is the best Graco spray gun?

#1 Best Overall: Graco Magnum 262805 X7 The Graco Magnum 262805 X7 is our review team’s pick as the Best Overall airless paint sprayer. It features adjustable pressure control to give you power over your paint flow.3 days ago

Can I leave paint in spray gun between coats?

If you’re between coats of paint of the same color, and need to allow the first coat to dry, remove the paint nozzle from the spray gun and give it a quick rinse so it doesn’t dry and clog. You can even let it rest in a bath of thinner until you’re ready to apply the second coat.

How long do Graco spray tips last?

Tip life varies by coating. Recommended replacement times: Latex – Replace after 15-40 gallons. Oils & Stains – Replace after 35-60 gallons.

How long does it take to paint a house with a sprayer?

Ordinarily 4 to 5 hours for 2 or 3 skilled painter’s helpers can completely mask a home’s exterior. Masking windows, light fixtures, foundation, vegetation, also concrete, decks, and surfaces not to receive paint splatters or over-spray.

What is the number one rule when using airless spray guns?

A good rule of thumb for an airless spray gun is to hold the gun about 12- 14 inches from the products surface.

What PSI should latex paint be?

For spraying latex paint, there are two pressures to keep in mind, depending on what you are painting: A 26 – 29 PSI is suggested for a base coat on the surface being painted; A clear coat is better served by a lower 2 – 3 PSI for better atomization (remember that from earlier?) and flow.

How much paint is lost when spraying?

A large percentage of the paint ends up in the air, where it can drift and settle onto everything in sight. This means you’ll be wasting 20 to 40 percent of the finish, depending on the application. You’ll also have to take extra time to mask off and cover up everything you want to keep paint free.

What is the best spray tip for trim?

If you starting out, a 310 spray tip can handle most trim work and cabinets. A 515 for walls. Then you can add a 619 for more coverage for interior walls and ceilings.

How do you know if a spray tip is worn?

How far away should you hold a spray gun?

Keep your distance consistent When you spray, hold the gun 12 inches from, and perpendicular to, the surface you’re spraying. Move your arm while keeping the gun pointed straight at the surface being painted—don’t fan the gun, as spraying at an angle can cause an uneven finish.

Is HVLP better than airless?

HVLPs are more fine production, not high production.” Unlike airless spray guns, HVLP guns have a second control knob that regulates air flow, giving the user more control over the fan size. There is less overspray, making HVLPs a good choice when working with expensive paint.

What should I look for when buying an airless paint sprayer?

Factors to have in mind when buying an airless paint sprayer The equipment must be appropriate for the material that you will be using. Choose a machine with the correct pressure for the material. Have in mind the size of the surface you will be painting and check again if the pressure is enough on the equipment.

Are airless paint sprayers worth it?

The use of airless paint sprayers is particularly worthwhile in large areas because the advantage of the higher working speed. For a long time, the rule of thumb used to be: use a paint sprayer starting from a 3-room apartment and to paint everything smaller than that roller and brush.5 days ago

Can paint be too thick for airless sprayer?

Should you thin paint for paint sprayer?

Actually, most beginner or hobby paint sprayers require the paint to be thinned because they don’t have enough power to suck up and push out anything thicker than stain. But, thinning the paint a little bit is even a good idea with a professional grade paint sprayer too – it creates a prettier, less bumpy finish!

How much do you thin latex paint for a airless sprayer?

Add ½ cup (118 milliliters) of water for every gallon of paint.

What kind of paint do you use on an airless sprayer?